Take the SmartFloor™ Daily Maintenance Pad and attach the pad to the auto-scrubber with the correct side up, and abrasive side pointed towards the floor.
Fill auto-scrubber with Ameripolish® Rejuvenating Cleaner which contains an a antimicrobial protection component, in fll tank at proper ratio which can be found on the Ameripolish® Rejuvenating Cleaner’s TDS.
Using Rejuvenating Cleaner is recommended but not required.
Clean the floor with the auto-scrubber as usual working wall to wall and not only main traffic areas.
For best results, the auto-scrubber movement should be roughly the equivalent to a walk.
Always attempt the “Daily” procedure for light restoration or spot repair first.
If light restoration or spot repair is not removed with Daily procedure, remove the SmartFloor™ Daily Maintenance Pad and install the SmartFloor™ Restoration Pad.
Make a minimum of 6 or more “passes” with the autoscrubber with the SmartFloor™ Restoration Pad.
This can be done all at one time or over the course of several days/weeks or until the floor reaches the desired finish level.
When the light restoration or spot repair is restored, install the Daily Maintenance Pad back onto the Driver Head and then return to following the “Daily” Procedure.