Penetrating curing agent

Ameripolish^® PCA is a penetrating curing agent that chemically hardens and dust-proofs concrete for improved abrasion resistance without forming a coating. PCA is recommended on newly placed concrete to add initial water and stain repellency while retaining slab moisture for improved curing. PCA requires no UV light for dissipation and can be used with integrally colored concrete.
Unlike traditional cure and seal products, PCA does not form a membrane that must be removed via chemical strippers or aggressive metal bond tools prior to polishing.

Rapid surface prep agent for wet/dry concrete grinding

Ameripolish^® EZ-Kut Grinding Agent is a water- based grinding agent, used for the initial cut on hard, dense concrete and helps with exposing large aggregate faster than dry or wet methods.
EZ-Kut also helps by dramatically increasing productivity of lower-grit diamond tooling. EZ-Kut Grinding Agent suspends concrete solids away from the surface for diamond tools to achieve maximum efficiency which reduces the project timeline, reduces labor costs, and extends the life of the diamond tooling. Can be used as part of a full flood wet process, or a mist as part of dry grinding.

Polishable grout coating system

Ameripolish^® PG-7K is a fast-setting, polymer-modifed, high-strength cement with outstanding bonding properties formulated specifcally to fll in small cracks, pinholes, and surface irregularities in concrete floors. It also increases durability, gloss and distinction of image (DOI) on most floors. PG-7K readily accepts Ameripolish^® concrete dyes and requires no special polishing procedures. Ameripolish^® PG-7K Part A – Powder must be used with PG-7K Part B – Liquid.

Grout Coat & Spall Repair

Ameripolish® PG-3 is a rapid-set, high-strength low low-viscosity polyurea repair material. This two-part, 1:1 system is 100% solids and designed for rebuilding and repairing broken control joints, filling voids under tile and concrete, and repairing spalled concrete surfaces very quickly. Ameripolish® PG-3 is intended for use in damaged control joints or warehouse spall damage created by forklifts or carts with steel or hard urethane wheels.

Liquid Grout Coating System for Dry Polishing

Ameripolish^® LG-7K mixes with the dust created while grinding concrete floors to create a super-durable matrix that automatically fills pinholes, small air voids, pop-outs, micro-cracks and other gaps in the concrete surface during grinding. LG-7K creates a monolithic surface that polishes faster, easier and more effectively. With gaps and imperfections filled, the floors accept Ameripolish^® densifiers, protective treatments and color-stains more evenly.
Ameripolish^® LG-7K also makes floors easier to maintain by eliminating the tiny nooks and crannies in concrete that trap and accumulate soil and other contaminants. The easy-to-apply treatment dries fast and is suitable for any floor undergoing grinding, from warehouse-industrial to highly polished aesthetic floors.

Concrete surface etching agent

Ameripolish^® EZ Etch cleans excess mortar, free latent lime, grease, oil, food stains and organic material from concrete floors and also opens up the pores/surface of the concrete to prepare it for penetrating products such as Ameripolish^® ColorJuice E, AquaShield, overlay concrete systems and water or solventbased sealers.
EZ Etch is enviromentally friendly and nonabrasive for use on polished concrete, stone, terrazzo, and other custom concrete surfaces.

Water-based microbial stain remover

Ameripolish^® Oil Ingester is an enzyme-based product that consumes and breaks down oil-based materials and absorbs odors from the surface of the concrete without causing damage or affecting any existing colorant, sealer, or stain protector. The biodegradable product is environmentally safe and can be left on surfaces for several days if needed to deeply penetrate seeped stains.

Water-based stripping agent

Ameripolish^® Strip & Clean is a water-based stripping agent specifically formulated for the grind-free removal of the Ameripolish^® 3D SP sealer from polished concrete floors. Strip & Clean also is a great tool to prepare exterior concrete for ColorJuice applications. It helps remove mold, mildew and other contaminates that would otherwise impair the project.

Polishing Abrasives

The SmartFloor™ Refinement System concept is engineered to provide a high-aesthetic floor that is an easy and economical way to utilize any polishing machines, including power trowels. The SmartFloor™ Refinement System consists of pads that have composite resin abrasive technology embedded in their design. The SmartFloor™ Refinement System allows for easy assembly of universal blade holders, that will allow the user of the machine to equip abrasives to virtually any power trowel machine. Additionally, the SmartFloor™ Refinement System can be outfitted to machines with our patented blade system or complement your planetary system with our custom ring designs.

Chemically bonding dyes for polished concrete

Ameripolish^® Classic Dyes were originally designed specifically for polished and exposed concrete, the Ameripolish^® Classic Dyes penetrate into the surface of the concrete slab for extremley long-lasting color that will not wear from daily usage. Classic Dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardeners, acid stains or even layered to create a truly unique, mottled effect.

Exterior concrete colorant

ColorJuice E concrete colorant is a fast, easy way to apply color to some types of interior and many types of exterior concrete. ColorJuice E is an improved formula of the old ColorJuice 3D and has an identical application process. It provides durable, rich hues by bonding color pigment directly into the concrete.
ColorJuice E is ideal for porous concrete finishes such as broom-finished or stamped concrete including pavements, porches, patios, driveways, sidewalks and pool decks. ColorJuice E can also used for interior concrete (at the appropriate grit stages) such as garage floors, and can be applied to other cementitious surfaces.

Solvent carrier for Ameripolish® dyes

Ameripolish^® ColorSolve is a solvent carrier designed and recommended for use with Ameripolish^® Classic and SureLock™ concrete dyes. ColorSolve is extremely easy to use and leaves little to no residual dye on the surface. Use of ColorSolve extends the dye coverage rate, increasing it up to 1,000 square feet per gallon!
ColorSolve should be applied by using an appropriate solvent sprayer with or without a microfiber mop. Due to the lower evaporation rate of ColorSolve, using an Ameripolish^® microfiber mop reduces labor costs, saves time, and extends the square footage of your dye.
Use of ColorSolve does not require taping and masking areas in preparation for the dye treatment. Another unique feature of ColorSolve is that it allows concrete dyes to be applied at higher grit levels such as at 800 and 1,500 grit for color enhancement or reapplication and refurbishing.

Colorant for edges and borders

Ameripolish^® Edge Tint provides wall-to-wall color options for border striping and edging areas that are difficult to grind and polish. Ameripolish^® Edge Tint is a mixture of proprietary non-yellowing acrylic blend (Part A) and the Ameripolish^® Dye coloring pack (Part B) available in coordinating Classic colors to eliminate edge work and complement any floor design.

Integral color for cementitious overlays

Ameripolish^® OS Integral Color is a concentrated liquid dispersion of mineral oxide pigment particles formulated to color concrete and is available in a broad range of hues. OS Integral Color meets ASTM C979, Standard Specification for Pigments for Integrally Colored Concrete and is approved by the manufacturer of Rapid Set^® TRU™, a leading cementitious self-leveling polishable overlay.

Penetrating agent for colorant & dyes

With the addition of the Ameripolish^® Penetrating Agent, the acetone flash is delayed from 7-8 seconds to 30+ seconds, providing ample time for dyes to penetrate further into the concrete and additional decorative applications to be performed. For use with any Ameripolish^® solvent-based dye.

Chemically bonding dyes for polished concrete

Ameripolish^® SureLock Dyes formula has recently been updated making them the most vibrant concrete dyes Ameripolish^® has ever produced. SureLock Dyes are versatile colorants for polished concrete that mix with water or Ameripolish^® ColorSolve™. SureLock Dyes are to be applied just before densifying with 3D HS or HSL, helping the color penetrate and chemically bond to the concrete
The predissolved concentrate liquid is fast and easy to use. The formula includes UV stabilizers to resist fading as well as a penetrating agent to eliminate further mixing and develop deep, rich colors even on hard, dense concrete.

Fast-setting densifier

Ameripolish^® 2D PL is a multi-silicate blend, that is intended for use on extremley porous concrete. 2D PL sets up faster than other Ameripolish^® densifiers, this keeps the majority of the 2D PL at the surface of the concrete in order to harden the wearable surface. Its ideal use is on open or porous concrete that will readily accept densifiers. When used in conjunction with Ameripolish^® SR² Stain Resistor it is especially effective at resisting stains.

Hybrid silicate densifier

Ameripolish^® 3D HS (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. By having 3 different size molecule silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete. 3D HS is ideal for use for exposed and polished concrete, as well as cements with integral color.

Low solids hybrid silicate densifier

Ameripolish^® 3D HSL (3 densifiers in one product) Hybrid Silicate Densifier is formulated with 3 different size molecule silicates to penetrate even the most difficult, tight floor cap. 3D HSL strengthens and densifies from within the concrete by providing strength at multiple levels of the slab. 3D HSL improves surface performance and resists the harmful effects of traffic wear and weathering by improving the abrasion resistance for new or aged concrete. 3D HSL is ideal for use for exposed and polished concrete, as well as integrally colored cements.

Silicate-Free Densifier

Ameripolish^® 3D SF Densifer introduces a new non-silicate for superior densification performance. With revolutonary ion-exchange chemistry, Ameripolish^® 3D SF offers dramatically improved abrasion resistance, stain resistance, and water repellency over conventional silicate densifers. This product fully penetrates varying densities of concrete regardless of region or hardness. 3D SF is ideal for use on exposed and polished concrete, as well as cements with integral color.

Mono-silicate densifier

Ameripolish^® Eco-Hard MS Mono-silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. Ameripolish^® Eco-Hard MS dust proofs, hardens, and cures the targeted surface in order to protect against dusting, pitting, spalling, and efflorescence that can be seen on untreated concrete. Ameripolish^® Eco-Hard MS is odorless, colorless, and non-toxic.

Mono-silicate densifier with higher solids

Ameripolish^® Eco-Hard MS PLUS Mono-silicate Densifier improves surface performance and resists the harmful effects of traffic wear and weathering. Ameripolish^® Eco-Hard MS PLUS dust proofs, hardens, and cures the targeted surface in order to protect against dusting, pitting, spalling, and efflorescence that can be seen on untreated concrete. Ameripolish^® Eco-Hard MS PLUS is odorless, colorless, and non-toxic

Fully-pentrating stain resistor

Ameripolish^® SR² is a penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² provide superior stain protection on most substrates.
SR² can be used as a standalone product, but to obtain optimum performance, Ameripolish^® SR² is recommended for use with Ameripolish^® 3D HS or HSL Densifiers.

Water-based fully penetrating stain resistor

Ameripolish^® SR² WB is a water-based, penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² WB provides superior stain protection on most substrates.
SR² WB can be used as a standalone product but, to obtain optimum performance, Ameripolish^® SR² WB is recommended for use with Ameripolish^® 3D HS or HSL Densifiers.

Fully Penetrating Stain Resistor

Ameripolish® SR² Plus is a penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil and water-based stains. The water and oil repelling qualities of SR² Plus provides superior stain protection on most substrates. SR² Plus can be used as a standalone product but, to obtain optimum performance, Ameripolish® SR² Plus is recommended for use with Ameripolish® 3D HS or HSL Densifiers.

Stain protector enhanced formula

Ameripolish^® 3D SP E™ is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP E™ creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion. Since reformulating the original 3D SP formula, 3D SP E™ has better abrasion and chemical resistance, but maintains the same easy application methods you’ve become accustomed to using.

Stain protector

Ameripolish^® 3D SP is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion.

Modified Urethane Coating

Ameripolish^® B-O-G is a single component modified urethane coating designed to provide maximum protection to concrete and cementitious overlayment systems. B-O-G is designed for protection against staining from the most corrosive cleaning agents as well as a user friendly application style.

Modified urethane sealer in wet look finish

Ameripolish^® X-Link E (WL) is a modified urethane high-gloss sealer. Modified from our original X-Link WL , X-Link E (WL) provides a true wet look. X-Link E (WL) is extremly durable and and breathable from beneath the concrete. X-Link E (WL) is designed for use with ColorJuice E, but can be used to seal natural concrete as well as other cementitious surfaces such as porous brick, natural and manufactured stone, stucco, slate, and flagstone.

Water-based sealer in matte finish

Ameripolish^® X-Link WB Surface Sealer is a stain protector for exterior and interior concrete. This fast drying water-based sealer was designed for use with ColorJuice E, but may also be used on uncolored concrete or with other compatible color products. It is ideal for any concrete or cementitious surface, as well as porous brick, natural and manufactured stone, stucco, slate, unglazed tile, and flagstone.

Burnishing Pad for Ameripolish® Stain Protection

Ameripolish® G Series Burnishing Pads are floor burnishing pads for used on ultra high speed floor machines that operate in the 1500-3000 RPM range. The pad is made of polyester fibers in a non-woven construction. This product is designed for the burnishing phase after Ameripolish® Stain Protection is applied and dried. The pad is available in varying sizes & grits.

Sprayable acrylic sealer

Ameripolish^® DNS-400 is a sprayable acrylic sealer that is fast-drying and long-lasting to protect and beautify concrete finishes. DNS-400 contains complex additives and acrylics not found in any other sealers to provide outstanding UV protection, along with fungicides to prevent mildew growth.
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.

Graffiti Preventative

Ameripolish^® Graffiti Guard is a penetrating protective sealer, designed to defend masonry, metal, and cementitious material from paint, soot, dirt, and other material that can be found obscuring walls and surfaces around the world. By forming a protective barrier, Graffiti Guard allows for easy removal of unwanted “graffiti” from cementitious surfaces and back to its original and intended aesthetic appearance.

Waterproofing treatment for concrete & masonry

Ameripolish^® AquaShield waterproofing treatment is a long-lasting treatment that provides water repellency to any concrete surface, helping to prevent staining and water damage. AquaShield coverage varies depending on the porosity of the concrete. Expect approximately 400FT² per gallon on a broom finish and approximately 2,000 on less porous finishes.

Water-based high performance polymer

Ameripolish^® PSE Paver Sealer Enhancer is a water-based, high-performance polymer that forms a breathable barrier that protects cementitious materials from salts, stains, dirt, oils, and moisture. It has been formulated to rejuvenate and enhance the original color of pavers and concrete replications while providing long-lasting weather protection against water penetration and UV degradation.
Ideal use for sealing interlocking pavers, colored cementitious replications, stone, and other cement textured surfaces.

High performance multi-purpose cleaner

Ameripolish^® CFE 2000 is our latest cleaning solution designed to break down the toughest and most troublesome stains. CFE 2000 is very effective in environments where other aggressive chemicals are unsuccessful. CFE 2000 is eco-friendly and comes in a concentrate intended for automatic scrubber use.

Concentrated multipurpose cleaner

Ameripolish® Rejuvenating Cleaner is a concentrated multipurpose cleaner that removes daily debris from hard surfaces. Rejuvenating Cleaner Concentrate provides an additional level of protection to combat microorganisms, for floors cleaned with this product. Rejuvenating Cleaner contains no harsh chemicals, and does not cause build up on the surface. In addition to polished concrete, it is ideal for use on vinyl tile, ceramic tile, terrazzo, wood, and composite materials. It rejuvenates the floor by reapplying trace amounts of densifier and stain-resistant additives while you clean with an auto-scrubber. This allows the reapplication of SR² as far out as every 2 years.

Daily Maintenance and Restoration Pads - Embedded Diamond Inserts (CRA)

The SmartFloor™ concept is engineered to provide the end user with a high-aesthetic floor and is an easy and economical way to maintain a polished concrete floor utilizing standard janitorial equipment and existing personnel. The SmartFloor™ Pad System consists of Daily Maintenance (Blue) and Restoration Pads (Orange) for maintaining and remediating polished concrete floors. The SmartFloor™ Pad System abrasive inserts are made of unique composite resin abrasive (CRA) technology that maintains a highly-refined floor without ongoing stock removal while also successfully restoring worn out floors.

High Performance Color-Etch Removing Solution

Ameripolish^® Stain Slayer is our spot-fixing solution designed to remove color-etching introduced with most troublesome stains. Stain Slayer is very effective in environments where other aggressive chemicals are unsuccessful.